Mile Marker® 70-50080C – 9,000 lbs Hydraulic Winch With Discrete Solenoid

Description

Vehicle FitmentThis part is universalProduct DetailsUniversal 9,000 lbs Hydraulic Winch With Discrete Solenoid (70-50080C) by Mile Marker®. Voltage: 12V. With a 17.9 cubic-inch motor that operates off your vehicle’s original power steering pump, a low gear for heavy pulling, and 100 feet of 3/8th-inch thick cable, this powerful winch will pull all day without overheating. Available with your choice of separate, sealed solenoid unit or a solenoid that’s integrated with the winch. 2-year manufacturer warranty.NotesRequires valve kit to install.CatalogWarrantyAbout usSpecificationsWinch Style: HydraulicPull Rating (lbs): 9,000 lbs.Winch Fairlead Type: RollerRemote Included: NoFree-Spooling: YesBrake: YesPower Out: NoDrive Gear: PlanetaryWinch Line Included: YesWinch Line Type: CableWinch Line Diameter (in): 3/8 in.Winch Line Material: SteelWinch Line Length (ft): 100 ft.No Load Line Speed: 33.60 fpmConforms to J706 Standards: NoMounting Hole Quantity: 4 holesMounting Pattern Length (in): 4.500 in.Mounting Pattern Width (in): 10.000 in.Speed: 2Gear Reduction Ratio: 6:1Quantity: Sold individuallyFeatures17.9 cubic inch motor uses hydraulic pressure supplied by your vehicle’s power steering pumpCan be installed anywhere on your vehicle with a permanent or detachable setupFitted as original equipment on Hummers by the United States military100 feet of 3/8th-inch thick steel cable2-gear differential provides a low gear for heavy pulling and a high gear for faster pulling of standard itemsAll adapters and parts necessary for fitment to your vehicle’s power steering pump are includedAutomatic load holding brake keeps clutch lever engaged to avoid cable free-spooling back suddenly2 year manufacturer warrantyU.S. Military tested – U.S. Military approved! The Mile Marker 10,500 pound hydraulic winch has served branches of the United States forces reliably for years in the worst conditions imaginable. In frozen tundras, submerged swamps, and desert heat, it has delivered every time with advanced design and corrosion-free construction that allows it to maintain full integrity in any climate. When using your winch back and forth at unusual angles is the only option, longer periods of operation won’t be a problem because this low-pressure hydraulic winch installs quickly and easily to your own vehicle’s power steering pump. Once both sets of lines have been hooked up, it can be used non-stop all day long without overheating. All instruction, adapters, and parts necessary for hookup are included. If you’ve ever been in a sticky situation on the trails where your vehicle was unexpectedly submerged in water or sinking into swampy mush, you know time is money when it comes to pulling yourself out. Getting your winch hooked up quickly and pulling yourself out faster can make the difference between zero vehicle damage and total loss. A differential with a separate low-speed gear gives you the torque you need to pull heavy loads over difficult terrain, and 100 feet of 3/8th-inch thick steel cable gives you the reach you need to get the job done in one shot. For those that need a winch that can be submerged in water, choose the Discrete Solenoid version with a separate, sealed solenoid unit than can be detached from your vehicle and used remotely. For those that prefer the more streamlined design of a 1-piece design, we offer the Integrated Solenoid version that mounts permanently on your vehicle. To ensure durability, all parts are constructed of corrosion-resistant materials with no chrome that can tarnish, flake, or pit. Headquartered in Pompano Beach, Florida, Mile Marker® is a premiere supplier of electric winches, locking hubs, hub conversion kits, etc. to the most demanding of customers: the United States military, and vehicle manufacturers. Online store brings the high quality of Mile Marker products to the customers with values that can’t be beat. When it comes to innovation, Mile Marker has always been a step ahead relentlessly engineering and developing new products that can meet the most demanding needs and tough situations. Whether you need to winch 2,500 pounds or 15,000 pounds for your ATV or 4×4, Mile Marker is the name for reliability you can count on when you’re on the trails.Brand:Mile Marker Part Number:70-50080CUPC:758626705808Alternate MPN:7050080C Have a Question? Ask an Expert800-505-3274 WarrantyMile Marker/Selectro Hubs and Conversion Kits Limited Warranty Mile Marker Industries warrants directly to the first purchaser that Mile Marker Hub Part Numbers 427, 428, and all “Selectro Classic” models will be free from defect in material and workmanship appearing under normal use and service for a period of one year. Mile Marker Industries warrants directly to the first purchaser that Mile Marker Hub Part Numbers 460, 426, and 438 will be free from defect in material and workmanship appearing under normal use and service for a period of two years. Mile Marker Industries warrants directly to the first purchaser that Mile Marker Locking Hub Part Numbers 104, 302, 420, 423, 430, 432, 435, 449SS, 459SS, 457, 466, 470, 481, and 490 will be free from defect in material and workmanship appearing under normal use and service for as long as said purchaser owns the locking hub. Mile Marker Industries warrants directly to the first purchaser that all Mile Marker Conversion Kits will be free from defect in material and workmanship appearing under normal use and service for a period of one year, except for the Four Wheel Drive Chain included in some kits, which has a 90-day warranty. If you discover a hidden defect, Mile Marker will, as its option, repair or replace the product or necessary replacement parts at no charge to you, provided you remove the product from the vehicle. Mile Marker Industries Hydraulic Winch Limited Warranty Mile Marker Industries warrants each winch when used in normal service against factory defects in materials and workmanship to the original commercial and recreational purchaser for the period of five (5) years. New cable assemblies are warranted against defects in workmanship and materials when received by the retail purchaser. There is no applicable warranty after initial use. Excluded from this warranty are the finish of the winch and any condition Mile Marker determines to have been caused by misuse or abnormal use. Warranty will only be valid for the original purchaser of the winch and installed on the vehicle for which it was originally registered. Mile Marker will repair or replace any or all winch parts, which are found after inspection to be defective. Mile Marker Industries Electric Winch Limited 2-Year Warranty Mile Marker Industries offers a limited two (2) year warranty to the original retail purchaser for each new Mile Marker electric winch, used as a recreational recovery winch only, against manufacturing defects in workmanship and materials on all mechanical components. Electrical components consisting of motors, solenoids, wiring, wire connectors and associated parts have a limited one (1) year warranty. New cable assemblies are warranted against defects in workmanship and materials when received by the retail purchaser. There is no applicable warranty after initial use. Excluded from this warranty are the finish of the winch and any condition Mile Marker determines to have been caused by misuse or abnormal use. Warranty will only be valid for the original purchaser of the winch and installed on the vehicle for which it was originally registered. Mile Marker will repair or replace any or all winch parts, which are found after inspection to be defective.Magnuson-Moss Warranty Act:Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More Related LinksExterior AccessoriesWinchesHydraulic WinchesMile Marker Winches