Bilstein® E4-MTL-0002A00 – Rod Guide Removal Plate

Description

Vehicle FitmentThis part is universalProduct DetailsUniversal Rod Guide Removal Plate by Bilstein®. The BILSTEIN Rod Guide Removal Plate makes removing rod guides from take-apart and racer-rebuildable shocks faster and easier. The plate securely mounts on 46mm BILSTEIN motorsports tubes and allows full rod guide removal with the tool in place.CatalogWarrantyAbout usFeaturesInside diameter machined to seat directly on the damper tube lipRecessed relief sections on upper IDBillet aluminum with blue anodizingSlot for piston shaft In 1954, Bilstein® was the first to realize the potential offered by an idea of Prof. Bourcier de Carbon, a French researcher in the field of vibrations. The aim was to eliminate the physical disadvantages of the conventional telescopic shock absorbers, whilst at the same time making the dampers lighter and able to be fitted in any position. The name Bilstein has for many decades been closely associated with high tech in the field of suspension design, driving comfort and safety. In order to expand this position in the future, Bilstein became a division of ThyssenKrupp Technologies AG in 1988, and a wholly-owned subsidiary in 2005. The partnership and co-operation within the group will enable the company to continue to inspire with innovations in the traditional Bilstein way. California Residents WARNING Cancer and Reproductive Harm.   www.p65warnings.ca.gov Brand:Bilstein Part Number:E4-MTL-0002A00UPC:651860827681Alternate MPN:E4MTL0002A00 Have a Question? Ask an Expert800-505-3274 WarrantyGENERAL AFTERMARKET WARRANTYArrayArray Bilstein of America warrants its gas pressure shock absorbers against defects in workmanship and materials for as long as you, the original purchaser, own your car.ArrayArray If a shock/strut malfunctions and BILSTEIN determines it to be defective, we will either replace it or repair it, depending on the term of the warranty based on the assembly’s model type.ArrayArray Note: If your vehicle was equipped with BILSTEIN from the factory (original equipment), warranty claims must be directed to the vehicle manufacturer.ArrayArray LIMITED LIFETIME WARRANTYArray B4 OE Replacement / B6 / B6 Performance / B8 Performance Plus / B12 Series / B14 (PSS) / B16 (PSS9 & PSS10) / B6 4600 / B8 5100 / B8 5100 (Ride Height Adjustable) / B8 5112 / B8 6112ArrayArray BILSTEIN warrants to the original retail purchaser that, for the life of each gas pressure shock, this product shall be free from defects in material and workmanship. Proof of purchase is required to process warranty. Please return product to the original place of purchase.ArrayArray LIMITED 2-YEAR WARRANTYArray B4 / B3 OE Replacement (Air) / Steering RacksArrayArray BILSTEIN warrants to the original retail purchaser that, for a period of two (2) years from the date of purchase, the B4 / B3 OE Replacement (Air) suspension and Steering Racks shall be free from defects in workmanship and/or material. Proof of purchase is required to process warranty. Please return product to the original place of purchase.ArrayArray LIMITED 90-DAY WARRANTYArray B8 5125 / B8 5150 / B8 5160 / B8 5165 / M 7100 Series / B8 8125 / M 9100 Series / M 9300 Series / B1 Series / BILSTEIN Clubsport® / MOTORSPORTS PRODUCTArrayArray BILSTEIN warrants to the original retail purchaser that, for a period of ninety (90) days from the date of purchase, this product shall be free from defects in material and workmanship. Any implied warranty of merchantability, fitness or fitness for particular purpose, except as may be prohibited by applicable law, is likewise limited in duration to ninety (90) days from the date of original retail purchase. Some States do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you.ArrayArray This warranty is non-transferable and does not cover normal wear and tear or any other loss, liability or damage resulting from improper alteration, disassembly, handling, installation, service, repair or use of this product. ArrayArray WARRANTY RESTRICTIONSArray The limited warranties set forth above do not cover normal wear and tear and are non-transferable. The following are warranty exclusions:ArrayArray Original equipment shock absorbers (vehicle manufacturer warranty)Array Improper installationArray Racing, driving competition or off-road useArray Modified use or other than BILSTEIN recommended vehiclesArray Commercial vehiclesArray Bent or broken Rods showing abuse or abnormal wearArrayArray Surface finish, boot or mounting hardware such as, but not limited to, rubber bushings, as well as labor charges are not covered by any of the foregoing limited warranties. BILSTEIN’s liability for a defective shock absorber is limited to replacement of shock with a new or reconditioned BILSTEIN shock absorber. Repair or replacement as provided by this warranty is customer’s sole and exclusive remedy in the event of a product failure. Manufacturer shall not be liable for any incidental, consequential or other damages resulting from the disassembly, handling, installation, service, repair or use of this product. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.ArrayArray Note: Other exclusions may or may not apply in certain states or rare circumstances.Magnuson-Moss Warranty Act:Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More Related LinksAutomotive ToolsSuspension & Steering Service ToolsShock/Strut ToolsBilstein Suspension & Steering Service Tools